Tipton Carbon Fiber Cleaning Rod Review

Tipton Carbon Fiber Cleaning Rod Review

Tipton carbon fiber cleaning rod is built solely to provide you with superior cleaning services. The Tipton brand is committed to providing you with expertly designed and high-quality maintenance solutions.

Their products which range from cleaning accessories, vises to oils and solvents are built to perfection by a team that has a clear understanding of the importance of maintenance on the lifespan and performance of a firearm.

When you think of the seriousness of the tasks that are assigned to cleaning rods, you’ll agree with me that carbon fiber is a perfect fit for the job. Combining the impeccable features of coated cleaning rods and stainless steel, it also adds a value of its own to whatever firearm it is cleaning.

Unlike stainless steel and coated rods, it won’t embed or scratch your bore. Also, carbon fiber rods can be bent to very extreme degrees and they’ll still return to their original straightness when they’re released.

These cleaning rods are called deluxe because of the ergonomic design of the handle. This handle rotates on two sets of ball bearings, resulting in a cleaning rod that follows the rifling of both pulling and pushing smoothly, even when the cleaning rod is under pressure. The carbon fiber cleaning rod has a “shank-through” construction which permits the user to apply considerable hammer blows to the end of the cleaning rod.

This is to enable them to get a tight patch through a bore. Click here to view more details about this cleaning rod. 

Features And Details 

Outlined below are the features and details of the Tipton Carbon Fiber Cleaning Rod 

  • Has two sets of bearings of high quality that will not bend under pressure.
  • The carbon fiber shaft does not embed particles that pose a risk of damage to the rifle bore.
  • Has a hanging hole to make storing it easy.
  • Ideal cleaning rod for working tight patches.
  • Features a comfortable and convenient ergonomic handle.
  • Easy to use 
  • Thick 
  • Ideal gift idea 
  • Great value for money 
  • Comfortable and convenient to use 
  • High-quality material


  • Incorrect sizing. The jags attached are bigger than the accompanying rods
  • Takes up more storage space

The Tipton Carbon Fiber Cleaning Rod has a rating of 4.8 out of 5 on Amazon. This is a near-perfect rating and goes on to show that even amidst all the downgrading going on around various market structures, the Tipton brand is doing and getting something right with this carbon fiber cleaning rod. 

Frequently Asked Questions (FAQs)

Can Cleaning Rod Damage Barrel?

Barrels are made of steel. Generally, cleaning rods are made with softer metal to prevent causing damage to the barrel. Although wood is a good substitute too, they stand a greater chance of breaking. Although barrels at built to be sturdy and durable, the cleaning rods should be used with care to prevent damage. 

However, avoid aluminum cleaning rods because they are soft enough to suck up fragments of steel. It goes on to turn these fragments into something more of a carbide ream. Certain steel rods are bad news, too. The trick lies in buying the appropriate stainless steel cleaning rod.

Bear in mind also, that when an AR15 is cleaned without a chamber guide, the chamber throat can be damaged. The chamber throat is important for reliability and accuracy. 

Are Aluminium Cleaning Rods Bad?

When a good cleaning rod is used appropriately, be assured that your bore will be kept healthy and alive for a long time. When a good or bad cleaning rod is used in the wrong way, it will kill off your bore faster than pouring a sizable quantity of hydrochloric acid down the muzzle of the bore. The ideal material for a good cleaning rod is either coated in plastic or steel. A good cleaning rod has to be stiff enough to not bend during use. 

A cleaning rod that bends is prone to scraping against the rifling. You already know what that entails. The worst types of rods are aluminum and brass. Not only do they tend to bend out of shape permanently, but they are also soft enough to suck up fragments of steel. It goes on to turn these fragments into something more of a carbide ream. Also, avoid any type of jointed rod except the joints fit together effortlessly. 

Is A Bore Snake Better Than A Cleaning Rod?

Patches and a cleaning rod ensure that you get a deeper cleaning. Of course, this is at the expense of bigger size, spending more time, and possible damage to your weapon as time goes on. In most situations, bore snakes tend to do a relatively decent job of cleaning. They are known to occupy space that’s far smaller than that occupied by cleaning rods.

They also clean up faster. These benefits make bore snakes more desirable to pick any day and any time. Cleaning rods are still useful and preferred in certain situations. 

Weapons that have short barrels need to be cleaned deeply and thoroughly from time to time. A cleaning rod will offer you this more than a bore snake. To be sure of the ideal cleaning tool for you, make a stop at the local gun shop and seek the opinion of an expert. They’ll recommend the ideal cleaning tool for you based on the kind of firearm you own, frequency of use and cleaning, the cleaning tools you have already, and your budget.

Can A Bore Snake Damage A Barrel?

Bore snakes do not damage barrels. On the contrary, they are useful for cleaning guns before and after firing. They are used to wipe the insides of the barrel easily and get rid of any fouling or residue. Despite their numerous benefits, several gun owners do not like the idea of using bore snakes for cleaning guns. There’s a general belief that the bronze bore bristles are not so durable. 

Finally, it all boils down to what you prefer and your ability to handle and maintain your gun cleaning equipment well enough. Not only do bore snakes save you a lot of time on cleaning, but they are also convenient to use. However, it is not recommended for use if you have debris such as dirt and sand stuck inside your barrel. This is the majority of the bore snakes can’t get rid of big sizes of debris stuck inside a gun barrel.

Should I Use Oil Inside A Gun Barrel?

Guns do not come cheap. Just like every other mechanical device, their functionality and lifespan are largely dependent on regular cleaning, maintenance, and lubrication. The barrel of every gun ought to be oiled. It’s safe. 

It is a good idea to leave a light coat of oil in the barrel of your gun before you put it away for storage. Run one or two dry patches through the barrel of the gun to get rid of the oil when you are ready to shoot after lubrication and putting away. 

How Often Should I Clean My Gun?

You need to have a clear understanding of the importance of cleaning guns, to be able to answer how often guns should be cleaned. Let’s look at the mechanism behind the firing of a gun. The primer in the ammunition cartridge is lit up every time you fire a gun. The ammunition cartridge, in turn, gives off a flame that lights up the gunpowder.

The burning of the gunpowder leaves a little gunpowder ash residue behind inside the gun barrel, just like the fire from a log. Traces of gunpowder ash can also be found in the frame, slide, or internal parts of the gun. Bullet metal in a little quantity is scratched on the bore when the bullet uses the action of expanding gases to go down the barrel.

The bullet metal scratched on the bore is usually either lead or copper. As a result of repeated firings, more is deposited on the bore. 

When you fail to clean the metal scraps out regularly, there will be a build-up of metal inside the bore. As time goes on, the accuracy and reliability of the gun begin to diminish. The burning of gunpowder generates and leaves a build-up of black mass that coats the moving parts of the gun, preventing it from functioning properly.
At the end of every shooting session, firearms should be cleaned lightly but thoroughly to clean out the build-up of metal. 

After cleaning, apply light gun oil or lubricant in small quantity to the gun surfaces that rub together. The rails between the frame and slide of a semi-auto and the hinges between a revolver’s cylinder and frame are included in this category. To prevent rust, swab the bore with a very light coat of oil.

When you apply too much oil on your gun, it leaves an oily cloud on it when next you bring it out for use. After oiling the necessary parts, wipe off the excess lubricant to avoid leaving an oily cloud behind.


If there’s any word that is synonymous with Tipton, it is clean. As their slogan says, ‘It is not clean until it is Tipton clean’. This brand’s commitment to standing out and producing high-quality and unique cleaning products has been reaffirmed with the release of the carbon fiber cleaning rod into the market. What’s not to love about this carbon fiber cleaning rod?

It combines the impeccable features of coated cleaning rods and stainless steel and also adds a value of its own to whatever firearm it is cleaning. As opposed to stainless steel and coated rods, it won’t embed particles or scratch your rifle bore. Also, carbon fiber rods can be bent to very extreme degrees and they’ll still return to their original straightness when they’re released.

I fully endorse the purchase of this carbon fiber cleaning rod.

24 Comments on “Tipton Carbon Fiber Cleaning Rod Review”

Leave a Reply

Your email address will not be published. Required fields are marked *

40 + = 44