Dewey Cleaning Rod Review

Dewey Cleaning Rod Review

Dewey Cleaning Rod is special length coated rods. They are made with 8 x 36 male threads which allow the use of accessories from Dewey or other cleaning rod manufacturers without needing a special thread adapter. The rods have universal slit tips and hard plastic ball-bearing handles.

You’ll find the rifle rods ideal for use on Highpower Service Rifles and the handgun rods are just the perfect length for most of the well-known handguns. It doesn’t matter the type of firearm you use, ranging from black powder, handgun, rifle to shot, the Dewey brand has the ideal cleaning rod for you and at the perfect length too.

From stainless steel rods to nylon-coated rods and brass rods, Dewey has a lot of cleaning rods in their catalog. One of the highlights of their products is the ball bearing handle design which is one of the most recognized in the gun cleaning industry. It is widely sought after by different types of shooters all around the world.

Their nylon coating is inarguably the thickest so far in the market. Although a lot of brands have tried to imitate this, they’ve not been successful. Click here to view more information about this product.

Features And Details

Outlined below are the features and details of the Dewey cleaning rods

Versatility 

They are made with 8 x 36 male threads which allow the use of accessories from Dewey or other cleaning rod manufacturers without needing a special thread adapter.

Ball-bearing handle 

One of the highlights of their products is the ball bearing handle design which is one of the most recognized in the gun cleaning industry. It is widely sought after by different types of shooters all around the world. 

Attachments

This one-piece rod comes with a brush adaptor and a brass jag. 

Pros

  • Quality product 
  • Doesn’t damage the barrel or the crown 
  • Works great 
  • Good construction 
  • The ball bearings in the handle make things a lot easier and keep your jag/tip from sliding off. 

Cons

  • No plastic storage tube attached 
  • They are too thick for the minimum caliber they are advertised for. 
  • The .22 rod will NOT fit down a .223 Rem barrel and the same is true for the other ones.

Dewey cleaning rod has a rating of 4.7 out of 5 on Amazon. You’ll agree with me that this is way above average. It shows that the satisfaction of customers is their utmost priority. The Dewey brand is open to constructive criticism and committed to putting in work to make their cleaning rods and other products better.

Frequently Asked Questions (FAQs)

Can Cleaning Rod Damage Barrel?

Barrels are made of steel. Generally, cleaning rods are made with softer metal to prevent causing damage to the barrel. Although wood is a good substitute too, they stand a greater chance of breaking. Although barrels at built to be sturdy and durable, the cleaning rods should be used with care to prevent damage. 

However, avoid aluminum cleaning rods because they are soft enough to suck up fragments of steel. It goes on to turn these fragments into something that’s more of a carbide ream. Certain steel rods are bad news, too. The trick lies in buying the appropriate stainless steel cleaning rod. Bear in mind also, that when an AR15 is cleaned without a chamber guide, the chamber throat can be damaged. The chamber throat is important for reliability and accuracy. 

Are Aluminium Cleaning Rods Bad?

When a good cleaning rod is used in the appropriate manner, be assured that your bore will be kept healthy and alive for a long time. When a good or bad cleaning rod is used in the wrong way, it will kill off your bore faster than pouring a sizable quantity of hydrochloric acid down the muzzle of the bore. The ideal material for a good cleaning rod is either coated in plastic or steel. A good cleaning rod has to be stiff enough to not bend during usage. 

A cleaning rod that bends is prone to scraping against the rifling. You already know what that entails. The worst types of rods are aluminum and brass. Not only do they tend to bend out of shape permanently, they are also soft enough to suck up fragments of steel. It goes on to turn these fragments into something that’s more of a carbide ream. Also, avoid any type of jointed rod except the joints fit together effortlessly. 

Is A Bore Snake Better Than A Cleaning Rod?

Patches and a cleaning rod ensure that you get a deeper cleaning. Of course, this is at the expense of bigger size, spending more time, and possible damage to your weapon as time goes on. In most situations, bore snakes tend to do a relatively decent job of cleaning. They are known to occupy space that’s far smaller than that occupied by cleaning rods. They also clean up faster. These benefits make bore snakes more desirable to pick any day and any time. Cleaning rods are still useful and preferred in certain situations. 

Weapons that have short barrels need to be cleaned deeply and thoroughly from time to time. A cleaning rod will offer you this more than a bore snake. To be sure of the ideal cleaning tool for you, make a stop at the local gun shop and seek the opinion of an expert. They’ll recommend the ideal cleaning tool for you based on the kind of firearm you own, frequency of use and cleaning, the cleaning tools you have already, and your budget. 

Can A Bore Snake Damage A Barrel?

Bore snakes do not damage barrels. On the contrary, they are useful for cleaning guns before and after firing. They are used to wipe the insides of the barrel easily and get rid of any fouling or residue. Despite their numerous benefits, a number of gun owners do not like the idea of using bore snakes for cleaning guns. There’s a general belief that the bronze bore bristles are not so durable. 

Finally, it all boils down to what you prefer and your ability to handle and maintain your gun cleaning equipment well enough. Not only do bore snakes save you a lot of time on cleaning, they are also convenient to use. However, it is not recommended for use if you have debris such as dirt and sand stuck inside your barrel. This is b majority of the bore snakes don’t have the capacity to get rid of big sizes of debris stuck inside a gun barrel. 

Should I Use Oil Inside A Gun Barrel?

Guns do not come cheap. Just like every other mechanical device, their functionality and lifespan are largely dependent on regular cleaning, maintenance, and lubrication. The barrel of every gun ought to be oiled. It’s totally safe. 

It is a good idea to leave a light coat of oil in the barrel of your gun before you put it away for storage. Run one or two dry patches through the barrel of the gun to get rid of the oil when you are ready to shoot after lubrication and putting away. 

How Often Should I Clean My Gun?

You need to have a clear understanding of the importance of cleaning guns, to be able to answer how often guns should be cleaned. Let’s look at the mechanism behind the firing of a gun. The primer in the ammunition cartridge is lit up every time you fire a gun. The ammunition cartridge, in turn, gives off a flame that lights up the gunpowder. The burning of the gunpowder leaves a little gunpowder ash residue behind inside the gun barrel, just like the fire from a log.

Traces of gunpowder ash can also be found in the frame, slide, or internal parts of the gun. Bullet metal in a little quantity is scratched on the bore when the bullet uses the action of expanding gases to go down the barrel. The bullet metal scratched on the bore is usually either lead or copper. As a result of repeated firings, more is deposited on the bore. 

When you fail to clean the metal scraps out regularly, there will be a build-up of metal inside the bore. As time goes on, the accuracy and reliability of the gun begin to diminish. The burning of gunpowder generates and leaves a build-up of black mass that coats the moving parts of the gun, preventing it from functioning properly. At the end of every shooting session, firearms should be cleaned lightly but thoroughly to clean out the build-up of metal. 

After cleaning, apply light gun oil or lubricant in small quantity to the gun surfaces that rub together. The rails between the frame and slide of a semi-auto and the hinges between a revolver’s cylinder and frame are included in this category. To prevent rust, swab the bore with a very light coat of oil. When you apply too much oil on your gun, it leaves an oily cloud on it when next you bring it out for use. After oiling the necessary parts, wipe off the excess lubricant to avoid leaving an oily cloud behind.

Conclusion 

Take note that some cleaning solutions especially Montana X-Treme Solutions and TM Solution by Sinclair International have a record of attacking the nylon coating of Dewey coated rods. Please, do not use any of these solutions with the coated rods. You can make use of stainless steel or brass rods if you want to use the aforementioned solutions. 

All the cleaning rods you’ll be getting from Dewey are of one-piece construction unless otherwise stated. Built to be durable and solid, the rods are widely accepted in the market. They boast of the thickest nylon coating available. Best part? They do not damage the crown or the barrel. Beyond reasonable doubts, this cleaning rod has it all. Generally, I think it’s a good buy.

Leave a Reply

Your email address will not be published.

80 + = 83